P32-EN – Subject to technical changes 04.11
52
Additional Information for Installers
10.3 Overview of other SolvisControl parameters
Loading/saving the factory settings
If you must reload the factory settings after accidental
changes are made, you can do this in the “DATA ADMINIS-
TRATION” menu. You can also make a backup copy of your
own settings and load it.
You can only restore the factory settings/backup
copy in the operating modes “Technician” and
“Expert”.
In the main menu, select the “Data Administration” entry
by turning and pressing the rotary wheel. Move the pointer
to “Load Factory Setting” (
figure above
). Press the rotary
wheel and confirm with “Yes”. Press the “BACK” button to
return to the main menu. Proceed in the same way for
“Create Backup Copy” or “Load Backup Copy”.
1 2 3 4 5 6 7 8 9 10 11 12 13 14
DATA ADMINISTRATION
BROWSE
BACK
Load Factory Setting
Create Backup Copy
Load Backup copy
Press the rotary wheel to load the factory settings
Displaying the designation of a function data set
The “DATA ADMINISTRATION” menu displays the designa-
tion of a set of function data. It shows the file name this
functional data had when it was saved to the hard disk.
• “Status”
: After a data set is loaded, the status of the
functional data is “original”. As soon as a change has
been made to the functional data, the status becomes
“modified”.
To rename a data set, transfer the function data to
the bootloader, use the “Memorymanager” program
to save the function data to a PC hard disk, change
the file name there, and use the bootloader to
reload the file to SolvisControl.
Opening the “DATA ADMINISTRATION” menu:
1 2 3 4 5 6 7 8 9 10 11 12 13 14
DATA ADMINISTRATION
BROWSE
BACK
Current Funct. Data:
SD-130206.dat
Status: modified
Displaying the name of a functional data set
10.3.1 The “DATA ADMINISTRATION” menu
In the function overview, press the “SERVICE” button. Move
the pointer down using the rotary wheel to the entry: “Data
Administration” and press the rotary wheel. Press “BACK”
twice to return to the function overview.
