Sole Diesel 10 GSC, Operator'S Manual

Page: 78 / 120

21
Rev. 2
Hint:
The target address (GSM phone number or e-mail address) must be set correctly to the setpoint(s).
Event Msg
Tel No/Addr Ch1 / 2
SMS Language
7. Function Description
OFF Mode
No start of the genset is possible. Out STARTER and FUEL SOLENOID are not energized. No reaction if
buttons START, STOP are pressed.
MAN Mode
START – starts the genset.
STOP – stops the genset.
Hint:
The engine can run without load unlimited time.
The controller does not automatically stop the running genset in MAN Mode.
Start-stop sequence (simplified)
MODE = MAN (Engine start/stop request is given by pressing buttons START and STOP)
MODE = AUT (Engine start/stop request is evaluated form Mains failure/return)
AUT Mode
The controller does not respond to buttons START, STOP. Engine start/stop request is given by binary
input REM START/STOP.
8. Genset Operation states
ENGINE STATE MACHINE
Init Autotest during controller power on
Not ready Genset is not ready to start
Prestart Prestart sequence in process, Prestart output is closed
Cranking Engine is cranking
Pause Pause between start attempts
Starting Starting speed is reached and the Idle timer is running
Running Genset is running at nominal speed
Loaded Genset is running at nominal speed and loaded
Stop Stop