Sole Diesel 10 GSC, Operator'S Manual

Page: 4 / 120

3
Rev. 3
TABLE OF CONTENTS
Introduction 2
Safety Precautions and Instructions
7
Service Assistance
11
Section 1 Genset Information
12
1.1 Genset Identification 12
1.2 Technical Specifications 13
1.3 Genset Limited Warranty 17
Restrictions 17
After-sales Service Contact 18
Section 2 Transport, Handling and Storage
19
2.1 Receipt 19
2.2 Transporting and Handling the Packed Genset 19
2.3 Transporting and Handling the Unpacked Genset 20
2.4 Storage of Packed and Unpacked Genset 21
Section 3 Installation
22
3.1 Angular Operation 22
3.2 Genset Installation 22
3.3 Prestart Checklist 23
Section 4 Operation
24
4.1 Starting Genset 24
4.2 Stopping Genset 24
4.3 Genset Operation at Low Temperatures 25
4.4 Winterization and Preservation 25
4.5 Restoration of Operational conditions 26
Section 5 Systems and Scheduled Maintenance
27
5.1 Operating Description 27
5.2 Periodic Maintenance Schedule 30
5.3 General 32
Maintenance Task. Screw tightening, fastening 32
Maintenance Task. Valve clearance Inspection 32
Maintenance Task. Compression pressure Inspection 33
5.4 Lubrication System 34
Circuit Description 34
Oil Specifications 35
Maintenance Task. Oil level Check 35
Maintenance Task. Oil Fill / Change 36
Maintenance Task. Oil filter Change 37
5.5 Fuel System 37
Circuit Description 37
Fuel Specifications 37
Maintenance Task. Fuel level Inspection 38
Maintenance Task. Fuel tank Clean 38
Maintenance Task. Fuel filter Change 38
Maintenance Task. Water separator filter Purgue 38
Maintenance Task. Injection pump Inspection 38
Maintenance Task. Injector Inspection 39
Maintenance Task. Bleeding air from the fuel system 40