Sole Diesel 10 GSC, Operator'S Manual

Page: 65 / 120

8
4. Operator interface SCO 10
GENSET CONTROL BUTTONS
POSITION BUTTON DESCRIPTION
1
START button. Works in MAN mode only. Press this button to initiate the start
sequence of the engine.
2
STOP button. Works in MAN mode only. Press this button to initiate the stop
sequence of the genset. Repeated pressing or holding the button for more than 2s
will cancel current phase of stop sequence (like ramping the power down or cooling)
and next phase will continue.
3
FAULT RESET button. Use this button to acknowledge alarms and deactivate the horn
output. Inactive alarms will disappear immediately and status of active alarms will be
changed to "confirmed" so they will disappear as soon as their reasons dismiss.
4
HORN RESET button. Use this button to deactivate the horn output without
acknowledging the alarms.
5
MODE LEFT button. Use this button to change the mode. The button works only if
the main screen with the indicator of currently selected mode is displayed.
Note:
This button will not work if the controller mode is forced by one of the binary inputs
Remote OFF, Remote MAN, Remote AUT.
13
1
2
3
4
5 6
9 12
10
11
7
8