Sole Diesel 10 GSC, Operator'S Manual, Page: 45 / 120

44
M
A
X
.
1
5
0
0
m
m
M
IN
.
4
5
0
m
m
M
IN
.
5
0
m
m
M
IN
.
1
5
0
m
m
W.L.
L
=
M
IN
. 3
00
m
m
L = MAX. 3000 mm
5.7 Inlet and Exhaust System
EXHAUST CIRCUIT DESCRIPTION
There are two possible installations of the exhaust system. You need to check the distance
between water injection point and waterline to decide which type of installation you need. This
information is specified in the following drawings.
The elements included in the drawing are essential for the correct genset operation:
- Waterlock (supplied as accessory) to prevent seawater from entering inside the genset
when it stops.
Minimum Capacity (l) 3,5
Table 14. Minimum exhaust muffler capacity
- Goose neck (supplied as accessory)
- Siphon breaker (supplied as accessory) – needed in case there is less than 150 mm
between the water injection point of wet exhaust and the waterline, or if the point of
injection is below waterline.
Fig. 40. Installation type 1 when between water injection point of wet exhaust and waterline is
minimum 150 mm