Sole Diesel 10 GSC, Operator'S Manual, Page: 66 / 120

9
Rev. 2
POSITION BUTTON DESCRIPTION
6
MODE RIGHT button. Use this button to change the mode. The button works only if
the main screen with the indicator of currently selected mode is displayed.
Note:
inputs Remote OFF, Remote MAN, Remote AUT.
GENSET OPERATION INDICATORS
POSITION DESCRIPTION
7
Genset failure . Red LED starts flashing when genset failure occurs. After FAULT RESET button is
pressed, the light steadies (if an alarm is still active) or turns off (if no alarm is active).
8
Genset voltage OK . Green LED is on if the generator voltage is present and within limits.
Note:
The limits for the generator voltage and frequency are given by setpoints in the Gener Protect
group.
DISPLAY AND CONTROL BUTTONS
POSITION BUTTON DESCRIPTION
9
PAGE button. Use this button to switch over display pages. See Display Screens and
Pages Structure section below this table for more details.
10 UP button. Use this button to move up or increase a value.
11 DOWN button. Use this button to move down or decrease a value.
12
ENTER button. Use this button to finish editing a setpoint or moving right in the
history page.
13 Graphic B/W display, 128x64 pixels