Sole Diesel 10 GSC, Operator'S Manual, Page: 42 / 120

41
Rev. 3
5.6 Cooling System
The genset cooling system is based on coolant circulation controlled by centrifugal pump with
thermostatic control and heat exchanger, where the coolant is refrigerated by sea water. Moreover, the
exhaust manifold is cooled also by sea water.
COOLANT CIRCUIT DESCRIPTION
Fig. 34. Coolant
circuit
Coolant Circuit Capacity (l)
8 GTC / 10 GTAC / 7 GSC / 8 GSAC 3,5
11 GTC / 14 GTAC / 10 GSC / 12 GSAC 6,25
17 GTC / 20 GTAC / 14 GSC / 17 GSAC 8,0
Table 13. Coolant circuit capacity
SEAWATER CIRCUIT DESCRIPTION
Fig. 35. Seawater circuit
COOLANT SPECIFICATIONS
It is recommended use KRAFFT ACU 2300 CC 50% coolant or another coolant with similar
specifications. On the other hand, distilled water with an anti-freezing agent is also suitable. The anti-
freezing agent concentration according to operating conditions is specified in anti-freezing agent
1. Coolant pump
2. Heat exchanger
3. Thermostat
1. Bottom cock (supplied as accessory)
2. Sea water filter (supplied as
accessory)
3. Sea water pump
4. Heat exchanger
5. Wet exhaust elbow