l
CPU
: The communication board firmware version
l
Country
: the current country setting
Server Communication Status
S e r v e r : L A N
< S _ O K >
S t a t u s :
< O K >
x x x x x x x x
< E R R O R M E S S A G E >
NOTE
If the connection method is CDMA (refered to as "Cellular" in the status screens) or GSM, the server
screen is replaced with the Cellular or GSM status screens (see
on page 68 and
l
Server
: The method of connection to the SolarEdge monitoring platform.
l
S_OK
: The connection to the SolarEdge monitoring platform is successful (should appear only if the is
connected to the server).
l
Status
: Displays OK if the inverter established successful connection and communication with the
specified server port/ (LAN, RS485 or ZigBee card).
l
xxxxxxxx
: Eight-bit Ethernet communication connection status: A string of 1s and 0s is displayed. 1
indicates OK, 0 indicates an error. For a list of the possible errors and how to troubleshoot them, refer
to
l
Error message
, according to failure. Refer to
IP Status
This screen describes the Ethernet configuration: IP, Mask, Gateway and MAC address (Media Access
Control) of the Inverter.
I P
1 9 2 . 1 6 8 . 2 . 1 1 9
M S K 2 5 5 . 2 5 5 . 2 5 5 . 0
G W
1 9 2 . 1 6 8 . 2 . 1
M A C 0 - 2 7 - 0 2 - 0 0 - 3 9 - 3 6
Chapter 8: User Interface
SolarEdge
-
StorEdge Installation Guide MAN-01-00262-1.3
67
