ZigBee Status
This screen describes the ZigBee configuration:
P A N : X X X X X
C H : X X / X X X X
R S S I : < L >
M I D : X X X X X X
l
RSSI
: The receive signal strength indication of the closest ZigBee in the system. L = low, M = medium, H
= high and (-) = no signal.
l
PAN ID
: The ZigBee transceiver PAN ID (Personal Area Network Identification), the ID uniquely
represents a device in a Zigbee network.
l
Ch.
: The ZigBee transceiver channel
l
ID
: The ZigBee transceiver ID
l
MID
: The Master ID of the coordinator (master) ZigBee card. This field is shown only in devices with
router (slave) ZigBee cards, and after a successful ZigBee association. If a ZigBee card is not connected,
a
No ZigBee
message is displayed instead of the
MID
field.
Cellular Status
If a cellular (CDMA) modem is connected, this screen replaces the Server status screen:
S e r v e r : C e l l
< S _ O K >
S t a t u s : < O K >
S i g : 5
M N O :
< E r r o r m e s s a g e >
l
Server
: The method of communication to the SolarEdge monitoring platform. Should display Cell.
l
Status
: Displays OK if the inverter established a successful physical connection to the Cellular modem.
l
S_OK
: The last communication to the SolarEdge monitoring platform was successful (appears if the
inverter is connected to the platform).
l
Sig
: The signal strength, received from the cellular modem. A value between 0-5, (0 = no signal, 5 =
excellent signal).
l
Error message
per communication connection status failure
GSM Status
If a GSM modem is connected, this screen replaces the Server status screen:
S e r v e r : C e l l < S _ O K >
S t a t u s : < O K >
M N O : < x x x x x x x > S i g : 5
< E r r o r m e s s a g e >
l
Server
: The method of communication to the SolarEdge monitoring platform. Should display
Cell
.
l
Status
: Displays OK if the inverter established a successful physical connection to the modem.
l
S_OK
: The last communication to the SolarEdge monitoring platform was successful (appears if the
inverter is connected to the platform). If S_OK is not displayed, refer to
l
MNO
: The mobile network operator name
l
Sig
: The signal strength, received from the modem. A value between 0-5, (0 = no signal;
SolarEdge
-
StorEdge Installation Guide MAN-01-00262-1.3
68
ZigBee Status
l
5 = excellent signal)
Error message
: per communication connection status failure
