UPS for 400 Vac Grid, User Guide, doc. rev. 4
126
The Status screen appears:
Figure 115: The Status Screen
In the diagram, shown in Figure 115, the highlighted yellow line indicates the present power
flow through the UPS.
A yellow triangle with an exclamation point inside indicates an alarm condition related to the
UPS component at the point where the triangle is located. Clicking on the component will
provide more detailed information about the problem.
Clicking various parts of the Status screen diagram reveals additional information, including
present voltages and current readings.
The Status screen shows the power source and destination route currently in use. (The route is
different for each of the 3 automated operation modes.)
Table 5: Key to Figure 115 (the Status screen)
I
TEM
D
ESCRIPTION
1
Navigation trail – shows how you arrived at this screen.
2
Voltage and amperage reading of each bypass input phase. Pressing the
bypass
input icon displays additional measurements for each bypass input phases.
3
UPS state (ON / OFF)
and mode (Normal [inverter] mode / Bypass mode / Battery mode / No output).
