SolarEdge Critical Power B300 User Manual Download Page 124

Page: 124 / 152

UPS for 400 Vac Grid, User Guide, doc. rev. 4

124



Insert the USB with preloaded software in the root folder.

To upgrade the full system:

Select System, see Figure 109.

Press Start to begin the software upgrade process.

Wait as the system runs through the various subsystems and upgrades each with the
relevant software.

To upgrade the static switch only:

Select STSW, see Figure 109.

Press Start to begin the software upgrade process.

Wait as the system upgrades the static switch with the relevant software.

To upgrade the inverters only:



Select the Inverter(s) you would like to upgrade

Note that they are positioned in the same numbering layout as their physical position in the rack.

Figure 112: Inverter upgrade screen



Press Start to begin the software upgrade process.

If you would like to upgrade PFCs only:



Select the PFC(s) you would like to upgrade

Summary of Contents for Critical Power B300

























































































































































Search results

Summary of Contents for Critical Power B300

Reviews:

Related manuals for Critical Power B300

Brands by name

Popular brands

SolarEdge Critical Power B300, User Manual

Search results

Summary of Contents for Critical Power B300

Reviews:

Related manuals for Critical Power B300

Brands by name

Popular brands