135
UPS for 400 Vac Grid, User Guide, doc. rev. 4
In certain unusual situations, the user may want to change the severity level of a
given message. This can be accomplished through the Setup > Alarms > Alarm
configuration screen.
Figure 123 (below) presents an example of a listing of the log file:
Figure 123: Listing of the log file contents
To scroll through the log messages, slide your finger up or down along the touch screen, or use
the UP and Down arrow keys.
To display detailed information about the system status at the time the log entry was recorded,
tap the log message in question. For example, tapping the message the message with the yellow
triangle in Figure 123 ("UPS module #3 is sending an alarm or warning") displays the status of
system parameters at the time of the fault (Figure 124). Touching any of the buttons at the
bottom of the screen displays the detailed readings for the selected system component as
recorded at the time of the log entry.
