85
UPS for 400 Vac Grid, User Guide, doc. rev. 4
For a table of information relating to Modbus Queries, refer to Table 7.
For additional information about this connector, refer to the Installation Guide.
8.2.6.6.
(Optional feature) Email configuration
You can have the UPS send email messages to the email addresses of your choice, containing
information about the starting and ending of system alarms.
The message body contains:
A timestamp
The user-assigned priority of the message (Informational / Warning / Critical)
The main message text as it appears in the log
The status of the log message: “On” (alarm condition started) or “off” (alarm condition ended)
Figure 72: Example of email message body
You must configure several parameters in order to use the optional email alarm notification.
(Optional) To use the email alarm notification feature:
1.
From the System menu navigate to Setup > Connectivity > Email.
The following screen appears:
