UPS for 400 Vac Grid, User Guide, doc. rev. 4
98
8.2.9.2.
Setup > Dry contacts > Output dry contacts
Figure 86: Setup, Output Dry Contacts
There are eight output dry contacts
There are currently over 60 alarm conditions to which the output dry contacts can be linked,
so that when the alarm condition occurs, the state of the output dry contact will change.
Any number of output dry contacts can be linked to a single alarm condition.
Each output dry contact can be linked to any number of alarm conditions.
The output dry contacts are numbered 1 through 8.
The alarm conditions are listed in Table 4. Table 4 below lists alarm conditions in
alphabetical order.
Table 4: Alarms that can trigger output dry contacts
Ac input failure
Ac input voltage high
Ac input voltage low
Actual responding modules are less than defined
All UPS modules not responding
