socomec SUNSYS - B10, Installation And Operation Manual

Page: 22 / 54

22
6. OPERATION OF PV INVERTER
6.1. Initialization for Regulation Type Setting
The Inverter provides a
“Select Safety” function at the first time start-up as a process in which user is able to
select the intended language displayed and regulation type before starting normal operation.
The Inverter will not able to operate normally before regulation setting is completed even though it is connected
correctly at both DC input and AC output.
This operation is very delicate, since due to problems of yield, it is possible to run only once. in case
of error, you must contact Socomec service center.
At first time them,
Will be given the opportunity to choose the country from several European countries,
Selecting them by using the arrows
”
↑
” e “
↓
”. Identified the country desired, press the "OK" key after which
they will be asked to confirm acceptable again by pressing the "OK" key.
Set Italy ?
Cannot Change After
First Setting
Yes No
Italy
Please Select
Installation Country
Green backlight
Green backlight
Green backlight