socomec SUNSYS - B10, Installation And Operation Manual

Page: 28 / 54

28
6.4.2. LCD screens
1. Startup
After the Inverter starts up, the LCD shows the name of regulatory for wich it was setting and data logger
firmware version. The frame lasts for 3 seconds and changes to text information below.
2. Text display
The display shows four measurements and one status. The bottom-right part of the display shows the time and
date. On occurrence of a
“warning” or “error” message, the bottom line “Status” is automatically replaced by the
error message.
The user can change the four monitoring parameters.
a. Press
“
→
” to highlight the monitoring parameter at the first line. By using “
↑
” and “
↓
”, the user can shift
to the next line.
b. Press
“OK” to begin setting the monitoring parameter.
c. Press
“
↑
” or “
↓
” to select the monitoring parameter of the line.
d. Press
“OK” to confirm.
Pac:7494W
Vdc:403/420V
Vac:230.5/232.3/231.1V
Iac:10.5/11.2/10.7A
Status:Normal
21.04.12 15:01
Green backlight
Green backlight