socomec SUNSYS - B10, Installation And Operation Manual

Page: 30 / 54

30
5. Error history
By pressing
“
↓
” again on the “Weekly Display”, the LCD changes to “Error History” as shown below. The LCD
displays the last two recorded error events.
Error History
E001:No Utility
@ 19.04.12 15:49
Vaule=N/A
E002:Grid Volt. Fault
@ 21.04.12 12:34
Vaule=230,260,240
To see more error events, press
“OK” first to toggle the display and then press “
→
” and “
←
”.
6. System Information
By pressing
“
↓
” again on “Error History”, the LCD changes to the “System information” of the Inverter including
serial number of the Inverter, firmware
version, etc… as shown below.
System Display
S/N:0123456789ABCDEF
Version:MB.20-00.27
Memory:0.3%
Date:21.04.2011 Sat
Time:15:01:19 GMT +08
Audible Alarm:On
Language:English
The following are the monitoring parameters shown in
“System Display”:
S/N: Serial number of the Inverter
Version: Firmware version of the Inverter
Memory: Memory status of the Data Logger
Date: Date setting of the Inverter
Time: Time setting of the Inverter
Audio Alarm: Turn
“On” or “Off” audio alarm
Language: Language setting of display
To change the Date, Time, Audio and Language settings:
Press
“
→
” and then press “
↑
” or “
↓
” to change the parameter to the desired setting.
Press
“OK” to confirm. Use “
↑
” and “
↓
” to alter the value
Press
“OK” to confirm.
Press
“
←
” to cancel a selection and complete the setting.