![background image](http://html1.mh-extra.com/html/snell-and-wilcox/hd1012/hd1012_installation-manual_1309062018.webp)
www.snellwilcox.com
Page
HD1012 Installation Manual – V3, Issue 1, Rev 1
S&W Production & Post Production
10
SYSTEM INTERCONNECTION -
continued
Inputs
Connect up to 12 HD-SDI inputs to the 12 Serial Inputs of the Switcher Mainframe. Sources can
be either video or key.
Outputs
Connect the
Program
,
Clean Pgm
,
Preview 1,
&
Preview 2
outputs to external equipment or
monitoring devices as desired. There are two copies of each output available.
Program
This is the main program output.
Clean Pgm
This is the main program output before the DSK stage.
Preview
1
Preview 1 can be switched between any source, a number of mixing points in the
system and transition previews.
Preview
2
Preview 2 is a second preview output with similar capabilities to the first, except that
it cannot preview mixer transitions.
The
Preview
1
output is also available in Analogue Component, as either YPbPr or RGB. Whether
YPbPr or RGB format is used can be selected in the
Configure - System - Genlock & Outputs
menu. R, G, B and Y outputs have syncs. If the monitor requires separate syncs, the
Ref Sync
Out
put can be used if it is not required for system referencing.
There are four Aux outputs for use as required. There are two copies of each output.
Connection Diagram
Program
Clean Program
Preview 1
Preview 2
Analogue
Preview
Aux 1
Aux 2
Aux 3
Aux 4
Inputs
1
2
3
4
5
6
7
8
9
10
11
12
Ref
Loop
Terminator
HD1000 Mainframe
1
1a
2
2a
3
3a
4
4a
Pgm
1
2
1
2
1
2
1
2
Clean
Pvw-1
Pvw-2
Y
Pb
Pr