manualshive.com logo in svg

Snell & Wilcox HD1012, Installation Manual

Share
Download
Snell & Wilcox HD1012 Installation Manual Download Page 29

www.snellwilcox.com

S&W Production & Post Production

HD1012 Installation Manual – V3, Issue 1, Rev 1

Page 21

CONTROL PORTS AND PROTOCOLS - 

continued

S & W Tally

This protocol transmits detailed tally information every field for use by external intelligent tally
systems.  The protocol used is specific to Snell & Wilcox, and details are available on request.

S & W

 

Router & S & W

 

Router No Aux

For use with Snell & Wilcox HD1132 router.

Remote Panel 8 & Remote Panel 16

Allows remote control of M/E 1 on 2.5M/E & 3M/E Switchers using a CP8 or CP16 panel.

Aux Control Quartz & Aux Control ProBel

Allows remote source allocation of the Aux outputs using a Quartz or ProBel remote panel.

Probel TX320 & DVE

These are proprietary protocols.

BBC Camera

This is a proprietary protocol for use with virtual studio software.

Button Bus

The address code of the pressed control panel button is sent from the applicable port.

B-Bus Multi Ctl

Allows one control panel to control two mainframes in parallel, i.e., a SD & HD system.

P-Bus

Allows up to 32 RS-485 devices to be strung off a port and triggered independently.

Router Protocols

Allows a variety of third party Integrated and/or Pre-Selecting routers to be used with the HD1024.
Select the appropriate control protocol for a Pre-Select router (if used) and the Integrated router (if
not the S&W HD1132) from the available router protocols, see table below.

Router Model

Protocol for Integrated use

Protocol for Pre-Selecting use

Pro-Bel HD Sirius

Fast Simple Rtr

Pre ProBel Rtr

Pro-Bel HD

ProBel Router

Pre ProBel Rtr

PESA Cheetah HD

N / A

Pre PESA Rtr

PESA Cougar HD

N / A

Pre PESA Rtr

NVision HD series

N / A

Pre NVision Rtr

Summary of Contents for HD1012


























































Reviews:

No comments

Brands by name

Popular brands

Load more brands