![background image](http://html1.mh-extra.com/html/snell-and-wilcox/hd1012/hd1012_installation-manual_1309062003.webp)
www.snellwilcox.com
S&W Production & Post Production
HD1012 Installation Manual – V3, Issue 1, Rev 1
Page iii
SAFETY
Explanation of Safety Symbols
This symbol refers the user to important information contained in the
accompanying literature. Refer to users manual.
This symbol indicates that hazardous voltages are present inside. No user
serviceable parts inside. This unit should only be serviced by trained personnel.
Safety Warnings
Servicing instructions, where given, are for use by qualified
personnel only. To reduce risk of electric shock do not
perform any actions on this equipment other than contained
in the operating instructions, unless you are qualified to do
so. Refer all servicing to qualified personnel.
WARNING
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE
TO RAIN OR MOISTURE.
?
Always ensure that the unit is properly earthed and power connections correctly made.
?
This equipment must be supplied from a power system providing a PROTECTIVE EARTH
connection and having a neutral connection which can be reliably identified.
?
The power outlet supplying power to the unit should be close to the unit and easily accessible
Power Supply and Connections
Mains Supply Voltage
Before connecting the equipment, observe the safety warnings section and ensure that the local
mains supply is within the rating stated on the rear of the equipment.
The HD1012 systems have power supplies that are suitable for voltages of 115V (+6% -10%) and
230V (+/-10%) @ 50 and 60Hz.