Snell & Wilcox HD1012 Installation Manual Download Page 10

Page: 10 / 57

www.snellwilcox.com

Page

HD1012 Installation Manual – V3, Issue 1, Rev 1

S&W Production & Post Production

INTRODUCTION

These installation instructions provide a guide to the installation of the HD1012 High-Definition
Switchers.

ON DELIVERY OF THE SYSTEM

The equipment is supplied in dedicated packaging provided by the manufacturer and should not be
accepted if delivered in inferior or unauthorised materials.

1. Carefully unpack the system components and check them against the packing list. If there is

anything incorrect, notify your dealer or Snell and Wilcox directly at once.

2. Check that the equipment has not been damaged in transit. If any damage has occurred,

notify your dealer or Snell and Wilcox directly at once as well as the carrier.

3. Always retain the original packing materials if possible, they could prove useful should it ever

be necessary to transport or ship the system units.

The system components are:

1. HD1000 Switcher Mainframe

2. CP1512 Control Panel

3. CP1512 LCD Touch Screen module

4. 25-way D-type cable to link Control Panel and LCD Touch Screen module

5. 9-way D-type cable to link Control Panel and LCD Touch Screen module

6. 10 Base-T cable to link Control Panel and Switcher Mainframe

7. User manual.

Summary of Contents for HD1012


























































Search results

Summary of Contents for HD1012

Reviews:

Brands by name

Popular brands

Snell & Wilcox HD1012, Installation Manual

Search results

Summary of Contents for HD1012

Reviews:

Brands by name

Popular brands