IQMIX25/26/40/41
RollCall Control Panel
Issue 1 Rev 4
Page 36
© 2017 SAM
5.12 Spigot Pages
A separate page is provided for each of the active spigots. These pages are dynamically
configured by the product, based on the capabilities of the software version/firmware
selected.
5.12.1 Input Spigots
Input spigots are defined by selecting the appropriate firmware version on the
Configuration
page. See section 5.4 for more information.
5.12.1.1
Spigot Pane
The
Spigot
pane provides basic monitoring for the selected Spigot. Click
Take
to apply any
changes made.
The
Spigot
pane details:
•
Spigot direction;
•
Associated BNC connector;
•
Current status;
•
The last
Take
performed on the spigot.
Disable Extended Headers
Extended header operation can be disabled for TR-03/TR-04 compatibility. Enable the
Disable Extended Headers
checkbox, then click
Take
to disable the extended headers.
Note:
The pages shown here may differ from those seen on your particular system, depending on
the model and configuration of your IQMIX module.
Figure 25
Typical Input Spigot Page
Figure 26
Input Spigot Pane
