IQMIX25/26/40/41
RollCall Control Panel
Issue 1 Rev 4
Page 38
© 2017 SAM
5.12.2 Output Spigots
Output spigots are defined by selecting the appropriate firmware version on the
Configuration
page. See section 5.4 for more information.
5.12.2.1
Spigot Pane
The
Spigot
pane provides basic monitoring for the selected Spigot. Click
Take
to apply any
changes made.
The
Spigot
pane details:
•
Spigot direction;
•
Associated BNC connector;
•
Current status;
•
The last
Take
performed on the spigot.
Audio Delay
Move the slider to set an
Audio Delay
as required. Click
P
to return to the preset default
value.
Make/Break Mode
Specifies how changes to an output’s destination will be made.
Make before Break
causes
the new destination to buffer data before connection to the previous destination is broken; this
results in a smoother transition, but requires more bandwidth.
Break before Make
simply
swaps the output’s destination without buffering.
Select the required mode from the drop-down list.
Figure 28
Typical Output Spigot Page
Figure 29
Output Spigot Pane
