IQMIX25/26/40/41
RollCall Control Panel
Issue 1 Rev 4
Page 31
© 2017 SAM
5.8 FEC
The
FEC
page allows FEC Clause 74 to be selected and FEC logging to be activated, if
required. FEC stats are also available.
The following facilities are available from this page:
Note:
This page is available for IQMIX25 modules only.
Figure 21
FEC Page
Option
Operation
FEC Clause 74
Allows low-latency FEC Clause 74 error correction to be
used. Options are:
•
On
•
Off
Status
Displays lock status for each SFP.
FEC Stats
Displays the number of corrected and uncorrected errors
received via the SFPs. Click
Enable Stats
to activate, and
Clear Count
to zero the counters.
FEC Logging
Information on several parameters can be made available to
a logging device connected to the RollCall network. Enable
check boxes to activate log fields as required.
Available log fields are shown in the table below.