IQMIX25/26/40/41
RollCall Control Panel
Issue 1 Rev 4
Page 37
© 2017 SAM
Audio Channels
Allows the number of audio channels in use to be restricted. Select from the list the highest
connector number to be used.
Streaming
Select the Ethernet connectors to use for this spigot. This will also determine the bandwidth to
be used. Options are:
•
Dual
- use both Ethernet connectors, and so all available bandwidth.
•
Single
- use either Ethernet connector, and so half of the available bandwidth.
•
A or B
- use one particular Ethernet connector, and so half of the available bandwidth.
•
None
- do not use an Ethernet connector for this spigot.
Format
Select the format to be used on this spigot. This will ensure that the appropriate level of
bandwidth is allocated.
5.12.1.2
Flow Pane
The
Flow
pane allows multicast IP and port details to be defined for the selected spigot. Stats
for the spigot can also be enabled from here.
Each spigot can support a variety of flows:
•
SMPTE 2022-6
•
RFC4175
•
VC-2
•
RFC3190
•
Data
Setting Multicast Details
To set multicast details:
•
Enter IP and port details as required.
•
Select
SMPTE 2022
from the
Flow Type
drop-down menu, if required.
•
Click
Packetizer Stats
to view network statistics for an outgoing flow, if required.
•
Click
S
to save the details.
In order to provide redundancy, Primary and Secondary flows are available.
Figure 27
Input Spigot Pane
