IQMIX25/26/40/41
RollCall Control Panel
Issue 1 Rev 4
Page 55
© 2017 SAM
5.23 SFP Configuration Page
The
SFP Configuration
page allows various SFP parameters to be adjusted, if required.
The majority of SFPs will operate correctly with IQMIX modules without any need for
adjustment. Some, however, may need to have module parameters set a little differently.
If difficulties are encountered with an SFP not working as expected, follow these instructions:
1.
Select the appropriate SFP type from the
SFP Database List
, and click
Take
. Verify
whether the SFP is now working correctly; if so, no further action is required.
2.
If the SFP is still not working properly, select
Custom
from the
SFP Database List
.
This allows all the parameters shown to be adjusted as required. Make changes and
click
Take
to apply them.
3.
When a working configuration is found, the parameter values can be saved by clicking
S
beside each field.
Note:
This page is available for IQMIX25 and IQMIX40 modules only.
Figure 42
SFP Configuration Page
