IQMIX25/26/40/41
RollCall Control Panel
Issue 1 Rev 4
Page 51
© 2017 SAM
5.18 Loopback Router
The
Loopback Router
page provides a basic SDI router as a redundant backup in case of
Ethernet failure.
If an Ethernet failure is encountered:
1.
Use the matrix radio buttons to specify which inputs should be routed to which
outputs.
2.
Select the
Video Flow to Use
- SMPTE-2022, RFC4175 or VC2.
3.
When set as required, click the
Enable Router Control
check box to activate routing.
Figure 37
Loopback Router Page