IQMIX25/26/40/41
RollCall Control Panel
Issue 1 Rev 4
Page 52
© 2017 SAM
5.19 Setup
The
Setup
page displays basic information about the module, such as the serial number and
software version. Use the functions on the page to restart the module or to return all settings
to their factory or default settings.
The
Product
pane displays technical information on the IQMIX module. You may be asked
for these details by SAM support if you need technical assistance.
5.19.1 Restart
Power-cycles the module. This will produce disturbances on the output picture.
Figure 38
Setup Page
Item
Description
Product
Name of the module.
Software Version
Currently installed software version number.
Firmware Version
Currently installed firmware version number.
Serial No
Module serial number.
SW Build
Factory software build number. This number identifies all
parameters of the module.
OS
Operating system version number.
Rear ID
Rear panel type.
Main PCB
Printed Circuit Board version number.
Main Mod Level
Main PCB modification level.
Main HW Build
Factory main hardware build number.
Feature PCB
Daughterboard PCB revision number.
Feature Mod Level
Daughterboard PCB modification level.
Feature HW Build
Factory Daughterboard hardware build number.
Important:
Restarting the module will affect all outputs.
