Snap-On Vantage Legend User Manual Download | Manualshive

Page: 48 / 86

background image

Scope / Multimeter

General Reference

40

z

To find waveform examples using ShopKey Pro:

NOTE

The following ShopKeyPro.com navigation procedure are subject to change,
as continuous site improvement are made. For the latest navigation
procedures, see the help information provided on the website.

1.

Sign in to ShopKeyPro.com.

If not already a member, sign up using the website or see you Snap-on sales
representative.

2.

Enter (identify) the vehicle details in the search field at the top of the screen
(

).

3.

Select the 1Search™ or Component Search tab (

).

4.

Enter a search term (e.g. MAF sensor).

5.

If SureTrack results are available, select the link under the Probable
Components header.

6.

From the SureTrack page, select the Waveforms and PIDs link (the link is
active only if waveforms or PIDs are available) (

).

NOTE

Examples are not available for all vehicles or components, and are supplied
from various diagnostic tools. All examples are provided as reference only.

For additional waveform reference information, visit the Snap-on Diagnostics
forums to ask questions, and share information at:

http://productforum.autorepairdata.com

Figure 3-44

ShopKey Pro - SureTrack waveform examples

Figure 3-45

Waveform examples

«
...
46
47
48
49
50
...
»

Summary of Contents for Vantage Legend























































































Reviews:

No comments

Related manuals for Vantage Legend

Brand: JB Systems Pages: 7

Brand: 3B SCIENTIFIC PHYSICS Pages: 36

Brand: 3A HEALTH CARE Pages: 16

Short/cut 2000 Audio Editor

Brand: 360 Systems Pages: 4

Brand: RASHA PROFESSIONAL Pages: 11

Brand: MADRIX Pages: 24

Brand: MADRIX Pages: 28

Sportsound SSR-300

Brand: Daktronics Pages: 42

Brand: NCR Pages: 20

Brand: DARAY Pages: 32

Body Armor Night Splint

Brand: Darco Pages: 2

Brand: MacDon Pages: 74

Brand: Gebhardt Anlagentechnik Pages: 152

Brand: Hach Pages: 58

Brand: Hach Pages: 52

Brand: Pari Pages: 12

Brand: laerdal Pages: 2

Brand: laerdal Pages: 104

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands