Scope / Multimeter
Operation and Controls
20
1— Sweep Scale
2— Sweep Scale
Menu
3— Sweep Scale Icon
Figure 3-17
Example:
Selecting 500ms, changes the sweep scale to a 500ms scale. The scale
is “always” divided by 10, therefore each division is incremented by 50ms
.
Figure 3-18
Probe (Probe type “test” selection)
Different types of Probes are available from the probe option menu, depending on
which type of test you are performing. Changing the probe selection, also changes
the vertical scale to the applicable type of measurement.
To select a Probe type, select the
Probe
icon to open the probe option menu, then
select a probe. The probe icon will change to the selected probe. Select
Close
from
the menu to close the menu.
Figure 3-19
Probe option menu
