Chapter 4 – Operation
4-34
SS2400T/S
4.11.2
FEEDING TO POSITION (SS2400S)
If end of bar is not reached, the barfeeder moves the bar by a pre-programmed feeding
length. The end of bar initiates the bar replacement subprogram.
Main program (feeding)
1. Tool head departure to safe position
2. Spindle stop
3. End of Bar test (at end of bar the jump to subprogram for new bar loading)
4. Clamping device opening
5. M-code (the barfeeder moves the bar see #105, #106)
6. Clamping device closing (the barfeeder returns)
7. Dwell for pusher retraction to the rear position
8. Technological program
9. Jump to program start
Subprogram (new bar loading)
50. Spindle positioning (necessary for non-circular sections)
51. Clamping device opening
52. M-code (the barfeeder ejects the rest)
53. 8 s dwell for ejection evaluation
54. M-code (the barfeeder moves the new bar in front of the clamping device, see #107)
55. Clamping device closing (the barfeeder returns)
56. Dwell for pusher retraction to the rear position
57. Tool replacement
58. New bar squaring
59. Tool head departure to safe position
60. Return from the subprogram to line 4
Summary of Contents for SPACESAVER 2400S
