SMW SPACESAVER 2400S, Installation, Operation And Maintenance Manual

Page: 14 / 86

Chapter 1 – Description
1-4
SS2400T/S
B: 150 mm
A: 150 mm
Bar preparation
No specific requirements for bar preparation.
Bar straightness
Bar must freely go into the user selected spindle insert.
Bar loading cycle
approx. 30 s
Setting time at change of bar diameter
Max. 2 minutes at change to other di time of lathe spindle insert replacement
Use
With all CNC lathes equipped with an interface for the barfeeder with the magazine
Electric equipment
Power supply 200/230/400 VAC, 50/60 Hz, 320 VA
Power circuits 200 VAC, 24 VDC
Logic circuits 24 VDC
Colour design
Light grey
Weight
Unit Net 360 kgs. (794lbs.)
Packaging
Transport dimensions 2160x780x1230 mm (85”x30”x49”)
Barfeeders are sealed in plastic sheet and transported on non-returnable pallets or in
boxes. Pallet weight is approx.35 kg(77lbs.), the weight of the whole box approx. 140
kg.(309 lbs.)
Noise emission
The values have been stated in accordance
with
Č SN EN ISO 4871 and basic standard
Č SN EN ISO 11201.
A B
w/o bars with bars w/o bars with
bars
Measured emission level of sound
pressure A, P
pAd
at the operator workplace
(dB)
67 69 68 71
Uncertainty, K
pA
(dB) 4 4 4 4