SMW SPACESAVER 2400S, Installation, Operation And Maintenance Manual

Page: 31 / 86

Chapter 4 – Operation
SS2400T/S
4-5
2
3
1
1/10 of the bar dia.
Fig.4.4 Magazine Position Setting
4.8 PUSHER
Barfeeders SS2400T/S are delivered with the following pushers:
Pusher
Bar
∅ SS2400T SS2400S
∅
6 mm with fixed stopper
6 – 15 mm option option
∅
10 mm with fixed stopper
12 – 80 mm standard standard
∅
18 mm with fixed stopper
30 – 105 mm standard standard
How to replace the pusher
•
Release 2 fixing screws 4.5/2 in the pusher lock 4.5/1, and pull the pusher out from the
front sleeve 4.5/3.
•
Replace the bush 4.5/3 in the front holder of the pusher by the bush corresponding to the
new pusher diameter.
•
Insert the new pusher in the front bush, put the rear holder to the pusher lock, and tighten
the screws 4.5/2.
•
Check or set the parameter #102.
3 2 1
Fig.4.5 Pusher Dismantling and Mounting