- 13 -
7
CN1
Power supply
connector
(5 pins)
Connect to the controller input power supply (DC24V) using the
power supply plug.
The control power supply (+), stop (+), motor power supply (+),
unlocking (+), common (-)
8
SW
Period set switch
Sets the backup period.
9
RDY/ALM
Ready/ Alarm LED
No absolute circuit alarm: Green light on
Absolute circuit alarm: Red light on
10
STS1
Status LED
Normal: Green light on, Reset: Orange light on, Absolute error:
Red light on
11
STS2
Battery charge LED
Fully charged (72 hours continuous charge): Green light On
Charging: Orange light On,
Not connected (including discharged state): Red light On
12
―
Applicable actuator
Model number label
Applicable actuator type is described
13
―
Battery case
Battery is housed in the case.
Please record the “date of start of use” in the space provided.
Use this as a guideline for when to replace the battery.
14
―
FG
Frame ground
(When the controller is mounted, tighten screws and connect the
grounding cable)
15
―
Controller
Model number label
Controller type is described
