- 10 -
3. Product Specifications
3.1 Basic specifications
Basic specifications of the product are shown below.
Item
Specification
Controlled motor
Step motor (servo 24 VDC)
Power supply specification
(Note 1)
Power supply voltage: 24VDC±10
％
Maximum current consumption: Rated 3.2A (Peak 5A) (Note 2)
[Includes the motor power supply, control power supply, stop,
unlocking]
Parallel input
Input 11 points (Photo coupler insulation)
Parallel output
Output 13 points (Photo coupler insulation)
Controlled encoder
Incremental A/B phase (800 pulse/rev)
Serial communication
RS485 (Complies with Modbus protocol)
Memory
EEPROM
LED display
PWR, ALM, RDY/ALM, STS1, STS2
Locking
With unlocking terminal
Cable length
I/O cable: 5m or less
Actuator cable: 20m or less
Battery
Nickel metal-hydride battery 3.6V
(Customer should prepare a battery suitable for the controller.)
Cooling method
Air-cooling type
Operating temperature range
0 to 40°C (no freezing, below 30°C recommended)
Operating humidity range
90% RH or less (no condensation) (Note 3)
Storage temperature range
0 to 40°C (no freezing)
Storage humidity range
90% RH or less (no condensation) (Note 3)
Insulation resistance
Between case (Radiation fin) and FG terminal:
50MΩ (500VDC)
Weight
220g (Screw mount type)
240g (DIN rail mount type)
Note 1) Do not use an inrush current suppressor type as the power supply for the controller
input.
Note 2) Power consumption depends on actuator.
Refer to the specification of actuator for details.
Note 3) Use in a situation where static electricity is not generated.