SMC Networks HRSH090 Series, Operation Manual

Page: 43 / 194

HRX-OM-R026
Chapter 3 Transport and Setting Up
HRSH Series 3.3 Installation
3-23
3.3.7 Wiring of operation signal output and alarm signal output
The operation signal output and alarm signal output are the outputs
generated by a contact signal to shown the status of the product.
The specifications of the contact for each signal output are as follows.
Table 3-11 Signal output contact spec. at the time of shipment
Contact output
Signal explanation
(Default setting)
Operation
Contact output signal 1
(Terminal no.0,8) Operation status signal
output
A
At run: Contact closed
At stop: Contact open
With power supply
shut off:
Contact open
Contact output signal 2
(Terminal no.1,9) Remote status signal
output
A
At remote: Contact closed
At non remote: Contact open
With power supply
shut off:
Contact open
Contact output signal 3
(Terminal no.2,10) Alarm status signal
output
B
At generation: Contact open
Not generated: Contact closed
With power supply
shut off:
Contact open
【
Tips
】
This product has three output signals which can be customized depending on
the customer’s application
Signals below can be output. Refer to the Communications Operation Manual
for more details.
- Ready completion (TEMP READY) signal output
- Operation stop alarm signal output
- Operation continuation alarm signal output
- Selected alarm status signal output
- Operation start timer setting status signal output
- Operation stop timer setting status signal output
- Recovery from power failure setting status signal output
- Anti-freezing setting status signal output
- Contact input signal1, 2 pass through signal output
- Warming up function setting status output
Be sure to lock out and tag out the breaker of the facility power supply
(customer power supply facility) before wiring.