SMC Networks HRSH090 Series, Operation Manual

Page: 53 / 194

HRX-OM-R026
Chapter 4 Starting the Product
HRSH Series 4.1 Before Starting
4-1
Chapter 4 Starting the Product
4.1 Before Starting

Check the following items before starting the product.

Installation conditions

Check the product is installed horizontally.

Check that there are no heavy objects on the product, and the external
piping is not applying excessive force to the product.

Connection of cables

Check the power, ground and communications (optional) cables are
correctly connected.

Circulating fluid

Check proper connection of piping at inlet and outlet.

Fluid level gauge

Ensure that the fluid level is on “H”.

Facility water piping (For water cooled type)

Check proper connection of piping at the facility water inlet and outlet.

Check that the facility water source is in operation.

Check that the facility water circuit is not shut off by valves.
【
Tips
】
In case of water cooled type, it has water regulation valve in facility water
circuit. Facility water might not flow if this product stopping.
Only people who have sufficient knowledge and experience about the
product and its accessories are allowed to start and stop the product.

Supply facility water within the specified
“
Table
8
-
1
” and “9.1
Specifications
”.