SMC Networks HRSH090 Series, Operation Manual

Page: 122 / 194

HRX-OM-R026
Chapter 5 Display and setting of various functions
5.20 Alarm customizing function HRSH Series
5-60
29.
Select the changing of DC line fuse cut from the table below with [
▲] key or [▼] key,
and confirm by pressing “SEL”.
Table 5.20-21 List of set value
Set value Explanation
Initial value
(Default setting)
Operation continues when this alarm signal is
generated.
Operation is stopped when this alarm signal is
generated.

How to monitor the temperature alarm Setting and Checking
30.
Press the [SEL] key once.
Setting screen of the temperature alarm monitoring method is displayed on the digital
display.
31.
Select temperature alarm monitoring method from the table below with [
▲] key or [▼]
key, and co
nfirm by pressing “SEL”.
Table 5.20-22 List of set value
Set value Item Explanation
Initial value
(Default setting)
Continuous
monitoring Alarm monitoring starts at the same time
as operation starts.

Automatic
monitoring
When the circulating fluid temperature is
outside of the alarm threshold range at the
time of operation start, the alarm will not be
generated until the temperature comes
inside the alarm threshold range.
Monitoring start
timer
Alarm will not be generated until it reaches
the time set for the AS.22 "Monitoring start
timer" after the operation starts.
Alarm monitoring starts when it reaches
the set time.
Automatic
monitoring
+
Monitoring start
timer
Alarm will not be generated until it reaches
the time set for the AS.22 "Monitoring start
timer" after the operation starts.
Alarm monitoring starts when it reaches
the set time.
When the circulating fluid temperature
enters the alarm threshold range before it
reaches the set time, the alarm monitoring
will be started at that time.

Settings of this function and example of alarm generating timing for 5.15.3 "Setting of temperature alarm
monitoring method and generation timing".
PV
SV