SMC Networks HRSH090 Series, Operation Manual

Page: 128 / 194

HRX-OM-R026
Chapter 5 Display and setting of various functions
5.20 Alarm customizing function HRSH Series
5-66
39.
Select the changing of circulating fluid pressure sensor failure from the table below with
[
▲] key or [▼] key, and confirm by pressing “SEL”.
Table 5.20-27 List of set value
Set value Explanation
Initial value
(Default setting)
Operation continues when this alarm signal is
generated.
Operation is stopped when this alarm signal is
generated.

Changing of pump maintenance Setting and checking
40.
Press the [SEL] key once.
The set screen of the changing of pump maintenance is displayed on the digital display.
41.
Select the changing of pump maintenance from the table below with [
▲] key or [▼] key,
and confirm by pressing “SEL”.
Table 5.20-28 List of set value
Set value Explanation
Initial value
(Default setting)
This alarm signal is not detected.

Operation continues when this alarm signal is
generated.
Changing of Changing of fan maintenance Setting and checking
42.
Press the [SEL] key once.
The set screen of the changing of fan maintenance is displayed on the digital display.
SV
PV
SV
PV
AL06, AL07, AL08, and AL09 will be disabled when A.RUN is selected.
(AL06, AL07, AL08, and AL09 will not be generated). If operation continues
with this condition, pump failure cannot be detected. A.STP is
recommended.