SMC Networks HRSH090 Series, Operation Manual

Page: 143 / 194

HRX-OM-R026
Chapter 5 Display and setting of various functions
HRSH Series 5.21 Communication function
5-81
46.
Select contact output signal 1 function
from the table below with [▲] key or [▼] key,
and confirm
by pressing “SEL”.
Table 5.21-24 List of set value
Set value Explanation
Initial value
(Default setting)
Without signal output
Operation status signal output

Remote status signal output
Ready completion (TEMP READY) signal output
Operation stop alarm signal output
Operation continuation alarm signal output
Alarm status signal output
Selected alarm status signal output
Operation start timer setting status signal output
Operation stop timer setting status signal output
Recovery from power failure setting status signal output
Anti-freezing setting status signal output
Contact input signal 1 pass through signal output
Contact input signal 2 pass through signal output
Warming up function setting status output
Signal output during automatic fluid filling
Contact output signal 1 operation Setting and checking
47.
Press the [SEL] key once.
The set screen of contact output signal 1 operation is displayed on the digital display.
48.
Select contact output signal 1 operation from the table below with [
▲] key or [▼] key,
and confirm by pressing “SEL”.
Table 5.21-25 List of set value
Set value Explanation
Initial value
(Default setting)
N.O type

N.C type
Contact output signal 1 selected alarm Setting and checking
49.
Press the [SEL] key once.
The set screen of contact output signal 1 selected alarm is displayed on the digital
display.
PV
SV
PV
SV