SMC Networks HRSH090 Series, Operation Manual

Page: 134 / 194

HRX-OM-R026
Chapter 5 Display and setting of various functions
5.21 Communication function HRSH Series
5-72
Slave addresses(MODBUS) Setting and checking
9.
Press the [SEL] key once.
The set screen of slave addresses (MODBUS) is displayed on the digital display.
10.
Select slave addresses (MODBUS) from the table below with [
▲] key or [▼] key, and
confirm by pressing “SEL”.
Table 5.21-6 List of set value
Set value Explanation
Initial value
(Default setting)
Setting/checking are not available unless the
serial protocol setting is MODBUS.
to
Sets of slave addresses for MODBUS.
Set range is 1 to 99.
Communication speed (MODBUS) Setting and checking
11.
Press the [SEL] key once.
The set screen of communication speed (MODBUS) is displayed on the digital display.
12.
Select communication speed (MODBUS) from the table below with [
▲] key or [▼] key,
and confirm by pressing “SEL”.
Table 5.21-7 List of set value
Set value Explanation
Initial value
(Default setting)
Setting/checking are not available unless the
serial protocol setting is MODBUS.
9600bps
19200bps

Slave addresses (simple communication protocol) Setting and checking
13.
Press the [SEL] key once.
The set screen of slave addresses (simple communication protocol) is displayed on the
digital display.
PV
SV
PV
SV
PV
SV