HRX-OM- T002
Chapter 3 Transport and Setting Up
HRS090 Series
3.1
Transport
3-1
Chapter 3 Transport and Setting Up
3.1 Transport
The product is heavy and has potential danger at transport. Also, to prevent
damage and breakage of the product, be sure to follow the instructions for
shown below for transport.
When moving the product by a folklift, insert the fork into the right
psitions referring to 3.1.1
Moving by forklift and slinging should be done by persons who have
the licenses.
Be sure to use all the four eye bolts when sling the product.
The slant angle of each rope should be 60 degrees oe less.
When the product is carried by using folklift, make sure that the folk
dose not damage the cover panels and piping port.
Never lay the product on its side.
The compressor oil will leak in to the refrigerant piping, which may
cause early failure of the compressor.
Drain the residual fluid from the piping as much as possible to prevent
any spillage.
Only persons who have sufficient knowledge and experience about
the product and system are allowed to transport and set up the
product.
Especially pay attention to personal safety.
