SMC Networks EliteConnect SMCE21011, User Manual, Page: 181 / 258

– 181 –
22
F
ILTERING
C
OMMANDS
The commands described in this section are used to filter communications
between wireless clients, control access to the management interface from
wireless clients, and filter traffic using specific Ethernet protocol types.
filter local-bridge
This command disables communication between wireless clients. Use the
no form to disable this filtering.
S
YNTAX
filter local-bridge <all-VAP | intra-VAP>
no filter local-bridge
all-VAP - When enabled, clients cannot establish wireless
communications with any other client, either those associated to
the same VAP interface or any other VAP interface.
intra-VAP - When enabled, clients associated with a specific VAP
interface cannot establish wireless communications with each other.
Clients can communicate with clients associated to other VAP
interfaces.
D
EFAULT
Disabled
C
OMMAND
M
ODE
Global Configuration
Table 20: Filtering Commands
Command Function Mode Page
filter local-bridge Disables communication between wireless
clients
GC 181
filter ap-manage Prevents wireless clients from accessing the
management interface
GC 182
filter acl-source-
address
Filters the ACL source address GC 182
filter acl-destination-
address
Filters the ACL destination address GC 183
filter ethernet-type
enable
Checks the Ethernet type for all incoming and
outgoing Ethernet packets against the protocol
filtering table
GC 184
filter ethernet-type
protocol
Sets a filter for a specific Ethernet type GC 184
show filters Shows the filter configuration Exec 185