![background image](http://html1.mh-extra.com/html/smc-networks/eliteconnect-smce21011/eliteconnect-smce21011_user-manual_1301132228.webp)
– 228 –
28
L
INK
L
AYER
D
ISCOVERY
C
OMMANDS
LLDP allows devices in the local broadcast domain to share information
about themselves. LLDP-capable devices periodically transmit information
in messages called Type Length Value (TLV) fields to neighbor devices.
Advertised information is represented in Type Length Value (TLV) format
according to the IEEE 802.1ab standard, and can include details such as
device identification, capabilities and configuration settings.
This information can be used by SNMP applications to simplify
troubleshooting, enhance network management, and maintain an accurate
network topology.
lldp service
This command enables LLDP on the access point. Use the no form to
disable LLDP.
S
YNTAX
[no] link-integrity ping-detect
D
EFAULT
S
ETTING
Disabled
C
OMMAND
M
ODE
Global Configuration
E
XAMPLE
AP(config)# lldp service
AP(config)#
Table 26: Link Layer Discovery Commands
Command
Function
Mode
Page
lldp service
Enables the transmission of LLDP
information
GC
lldp transmit hold-
muliplier
Sets the message transmission hold time
GC
lldp transmit interval
Sets the message transmission interval
time
GC
lldp transmit re-init-delay Sets the reinitial delay time
GC
lldp transmit delay-to-
local-change
Sets the transmission delay value
GC
show lldp
Shows the current LLDP information
Exec
Summary of Contents for EliteConnect SMCE21011
