SMC Networks EliteConnect SMCE21011, User Manual, Page: 173 / 258

C
HAPTER
19
| RADIUS Client Commands
– 173 –
D
EFAULT
S
ETTING
0 (disabled)
C
OMMAND
M
ODE
Global Configuration
C
OMMAND
U
SAGE
◆
When the RADIUS Accounting server UDP port is specified, a RADIUS
accounting session is automatically started for each user that is
successfully authenticated to the access point.
E
XAMPLE
AP(config)#radius-server accounting port 1024
AP(config)#
radius-server
accounting key
This command sets the RADIUS Accounting key.
S
YNTAX
radius-server accounting key <key>
key - The RADIUS Accounting server keyphrase.
D
EFAULT
S
ETTING
0 (disabled)
C
OMMAND
M
ODE
Global Configuration
E
XAMPLE
AP(config)#radius-server accounting key green
AP(config)#
radius-server
accounting
timeout-interim
This command sets the interval between transmitting accounting updates
to the RADIUS server.
S
YNTAX
radius-server {[primary | secondary] timeout-interim
<number_of_seconds>}
number_of_seconds - Number of seconds the access point waits
between transmitting accounting updates. (Range: 60-86400)
D
EFAULT
S
ETTING
3600