SMC Networks EliteConnect SMCE21011, User Manual, Page: 132 / 258

C
HAPTER
13
| System Management Commands
System Management Commands
– 132 –
◆
After boot up, the SSH server needs about two minutes to generate
host encryption keys. The SSH server is disabled while the keys are
being generated. The show system command displays the status of
the SSH server.
E
XAMPLE
AP(if-ethernet)#ip ssh-server enable
AP(if-ethernet)#
ip ssh-server port
This command sets the Secure Shell server port. Use the no form to
disable the server.
S
YNTAX
ip ssh-server port <port-number>
port-number - The UDP port used by the SSH server. (Range: 1-
65535)
D
EFAULT
S
ETTING
22
C
OMMAND
M
ODE
Interface Configuration (Ethernet)
E
XAMPLE
AP(if-ethernet)#ip ssh-server port 1124
AP(if-ethernet)#
ip telnet-server
enable
This command enables the Telnet server. Use the no form to disable the
server.
S
YNTAX
ip telnet-server enable
no ip telnet-server
D
EFAULT
S
ETTING
Interface enabled
C
OMMAND
M
ODE
Interface Configuration (Ethernet)
E
XAMPLE
AP(if-ethernet)#ip telnet-server enable
AP(if-ethernet)#