![background image](http://html1.mh-extra.com/html/smc-networks/eliteconnect-smce21011/eliteconnect-smce21011_user-manual_1301132170.webp)
– 170 –
19
RADIUS C
LIENT
C
OMMANDS
Remote Authentication Dial-in User Service (RADIUS) is a logon
authentication protocol that uses software running on a central server to
control access for RADIUS-aware devices to the network. An authentication
server contains a database of credentials, such as users names and
passwords, for each wireless client that requires access to the access point.
radius-server enable
This command enables the RADIUS server.
S
YNTAX
radius-server {primary | secondary} enable
primary - Specifies the primary RADIUS server.
secondary - Specifies the secondary RADIUS server.
D
EFAULT
S
ETTING
Disabled
C
OMMAND
M
ODE
Global Configuration
E
XAMPLE
AP(config)# radius-server primary enable
This setting has not been effective !
Table 17: RADIUS Client Commands
Command
Function
Mode
Page
radius-server enable
Enables the RADIUS server.
GC
radius-server address
Specifies the RADIUS server
GC
radius-server port
Sets the RADIUS server network port
GC
radius-server key
Sets the RADIUS encryption key
GC
radius-server accounting
address
Sets the RADIUS server accounting address
GC
radius-server accounting
port
Sets the RADIUS server accounting port
GC
radius-server accounting
key
Sets the RADIUS server accounting key
GC
radius-server accounting
timeout-interim
Sets the interval between transmitting
accounting updates to the RADIUS server
GC
show radius
Shows the current RADIUS settings
Exec
Summary of Contents for EliteConnect SMCE21011
