![background image](http://html1.mh-extra.com/html/smc-networks/eliteconnect-smce21011/eliteconnect-smce21011_user-manual_1301132088.webp)
C
HAPTER
8
| Wireless Settings
Interface Mode
– 88 –
◆
make MAC authentication take effect — Applies the specified
settings.
I
NTERFACE
M
ODE
The access point can operate in two modes, IEEE 802.11a/n only, or
802.11g/n only. Also note that 802.11g is backward compatible with
802.11b. Also note that 802.11g is backward compatible with 802.11b,
operating in the 2.4 GHz band. The 802.11a/n mode operates in the 5 GHz
band.
Figure 44: Interface Mode
The following items are displayed on the Interface Mode Selection page:
◆
Interface0 Mode — Selects the mode of the radio interface:
■
11ng: All 802.11g and n clients can communicate with the wireless
AP/ Router (up to 300 Mbps) using the 2.4 GHz band, but data
transmission rates may be slowed to compensate for 802.11g
clients.
■
11na: All 802.11a and n clients can communicate with the wireless
AP/ Router (up to 300 Mbps) using the 5 GHz band, but data
transmission rates may be slowed to compensate for 802.11a
clients.
Summary of Contents for EliteConnect SMCE21011
