SMC Networks EliteConnect SMCE21011, User Manual, Page: 230 / 258

C
HAPTER
28
| Link Layer Discovery Commands
– 230 –
D
EFAULT
S
ETTING
2 seconds
C
OMMAND
M
ODE
Global Configuration
E
XAMPLE
AP(config)#lldp transmit re-init-delay 10
AP(config)#
lldp transmit delay-
to-local-change
The length of time before which the access point will advertise its presence
on the network with an LLDP header.
S
YNTAX
lldp transmit delay-to-local-change <seconds>
seconds - Time in seconds. (Range: 1-8192 seconds)
D
EFAULT
S
ETTING
4 seconds
C
OMMAND
M
ODE
Global Configuration
E
XAMPLE
AP(config)# lldp transmit delay-to-local-change 10
txDelay range is 1 to quter of msgTxInterval
AP(config)#
show lldp
This command displays the current LLDP configuration.
C
OMMAND
M
ODE
Exec
E
XAMPLE
AP# show lldp
LLDP Information
===================================================================
Status :Enabled
Message Transmission Hold Time :5
Message Transmission Interval (seconds) :30
Reinitial Delay Time (seconds) :2
Transmission Delay Value (seconds) :2
===================================================================
AP#