SMC Networks 8126PL2-F, Management Manual

Page: 90 / 614

Configuring the Switch
3-42
3
• Enable Authentication Traps
3
– Issues a notification message to specified IP
trap managers whenever an invalid community string is submitted during the
SNMP access authentication process. (Default: Enabled)
• Enable Link-up and Link-down Traps 3 – Issues a notification message
whenever a port link is established or broken. (Default: Enabled)
Web – Click SNMP, Configuration. Enter the IP address and community string for
each management station that will receive trap messages, specify the UDP port,
trap version, trap security level (for v3 clients), trap inform settings (for v2c/v3
clients), and then click Add. Select the trap types required using the check boxes for
Authentication and Link-up/down traps, and then click Apply.
Figure 3-26 Configuring IP Trap Managers
CLI – This example adds a trap manager and enables both authentication and
link-up, link-down traps.
3. These are legacy notifications and therefore when used for SNMP Version 3 hosts, they must be
enabled in conjunction with the corresponding entries in the Notification View (3-52).
Console(config)#snmp-server host 192.168.1.19 private version 2c 4-65
Console(config)#snmp-server enable traps 4-67